Electrolux EWW1486HDW Manuel d'utilisateur télécharger pdf (Page 15)

If you set something incorrect, the

display shows the message Err.

9.5 Starting a programme

without delay start

Press :

•The indicator

stops to flash and

stays on.

•

The indicator

starts to flash on the

display.

• The programme starts, the door is

locked and the display shows the indi-

cator

.

• The drain pump can operate for a short

time when the appliance fills water.

After approximately 15 minutes

from the start of the programme:

• The appliance adjusts automati-

cally the programme duration

agree with the laundry load.

• The display shows the new val-

ue.

9.6 Starting a programme with

delay start

•

Press

again and again until the dis-

play shows the delay you want to set.

The related indicator comes on the dis-

play.

• Press

:

– The appliance starts the countdown.

– When the countdown is completed,

the programme starts automatically.

You can cancel or change the set

of the delay start before you press

.

To cancel the delay start:

1.

Press to set the appliance to

pause.

2.

Press until the display shows ’.

Press

again to start the pro-

gramme immediately.

9.7 Interrupting a programme

and changing the options

You can change only some options be-

fore they operate.

1.

Press . The indicator flashes.

2.

Change the options.

3.

Press again. The programme con-

tinues.

9.8 Cancelling a programme

1.

Press the button for some sec-

onds to cancel the programme and to

deactivate the appliance.

2.

Press the same button again to acti-

vate the appliance. Now, you can set

a new washing programme.

The appliance does not drain the

water.

9.9 Opening the door

While a programme or the delay start op-

erates, the appliance door is locked and

the display shows the indicator

.

CAUTION!

If the temperature and level of the

water in the drum are too high,

you cannot open the door.

Open the appliance door when the

delay start operates:

1.

Press to pause the appliance.

2.

Wait until the door lock indicator

goes off.

3.

Open the door.

4.

Close the door and press again.

The delay start continues to operate.

Open the appliance door when the

programme operates:

1.

Press the button for some sec-

onds to deactivate the appliance.

2.

Wait for some minutes and then open

carefully the appliance door.

3.

Close the appliance door.

4.

Set the programme again.

9.10 At the end of the

programme

• The appliance stops automatically.

• The acoustic signal operates (if it is acti-

vated).

•

In the display a

comes on.

•The indicator

goes off.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Commentaires sur ces manuels

Pas de commentaire