Electrolux WAL7E300 Manuel d'utilisateur télécharger pdf (Page 25)

The ProSense detection is

carried out with complete

washing programmes only

(no skipping phase

selected).

10.9 Programme phase

indicators

When the programme starts the indicator

of the running phase flashes and the

other phase indicators are steady on.

E.g. the washing or pre wash phase is

running: .

When the phase ends the relevant

indicator stops flashing and is steady on.

The next phase indicator starts flashing.

E.g. the rinse phase is running: .

If you select the Plus Steam the steam

phase indicators come on.

The steam phase is running: .

The anti-crease phase is running:

.

10.10 Interrupting a programme

and changing the options

When the programme is running, you

can change only some options:

1. Touch the button Start/Pause.

The related indicator flashes.

2. Change the options. The given

information in the display changes

accordingly.

3. Touch the button Start/Pause again.

The washing programme continues.

10.11 Cancelling a running

programme

1. Press the button On/Off to cancel the

programme and to deactivate the

appliance.

2. Press the button On/Off again to

activate the appliance.

Now, you can set a new washing

programme.

If the ProSense phase is

already carried out and the

water filling is already

started, the new programme

starts without repeating the

ProSense phase. The water

and the detergent are not

drained out in order to avoid

waste. The display shows

the maximum duration of the

programme, updating it

about 20 minutes after the

starting of the new

programme.

10.12 Opening the door

If the temperature and level

of the water in the drum are

too high and/or the drum still

rotates you cannot open the

door.

While a programme or the delay start

operates, the appliance door is locked.

1. Touch the button Start/Pause.

In the display the related door lock

indicator goes off.

2. Open the appliance door. If

necessary, add or remove the items.

3. Close the door and touch the button

Start/Pause.

The programme or the delay start

continues.

10.13 End of the programme

When the programme has finished, the

appliance stops automatically. The

acoustic signals operate (if they are

active).

In the display all washing phase

indicators become steady and the time

area shows .

The indicator of the Start/Pause button

goes off.

The door unlocks and the indicator

goes off.

ENGLISH 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Commentaires sur ces manuels

Pas de commentaire