Electrolux EBGL3SP Manuel d'utilisateur télécharger pdf (Page 23)

10.1 Shelf supports

Removing the shelf supports

You can remove the shelf supports to

clean the side walls.

Pull the front of the shelf support

away from the side wall.

Pull the rear end of the shelf support

away from the side wall and remove

it.

Installing the shelf supports

Install the shelf supports in the opposite

sequence.

10.2 Oven ceiling

You can fold down the heating element

on the oven ceiling to clean the oven ceil-

ing easily.

WARNING!

Deactivate the appliance before

you fold down the heating ele-

ment. Make sure that the appli-

ance is cold. There is a risk of

burns.

Folding down the heating element

Remove the shelf supports.

Hold the heating element with two

hands at the front.

Pull it forwards against the spring

pressure and out along the supports

on the two sides.

The heating element folds down.

You can clean the oven ceiling.

Installing the heating element

Install the heating element in the op-

posite sequence.

Install the heating element cor-

rectly above the supports on the

inner walls of the appliance.

ENGLISH 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Pas de commentaire

Electrolux EBGL3SP Manuel d'utilisateur Page 23