
Problem Possible cause and remedy
There is no spark when
lighting the gas.
• There is no electrical supply. Make sure that the
unit is connected and the electrical supply is
switched on. Examine the house electrical installa-
tion fuse.
• Burner cap and crown are placed uneven. Make
sure that the burner cap and crown are in correct
positions.
The flame is blow out im-
mediately after ignition.
Thermocouple is not heated sufficient. After lighting
the flame, keep the knob pushed for equal or less
than 10 seconds.
The gas ring burns un-
evenly.
Burner crown is blocked with food residues. Make
sure that the injector is not blocked and the burner
crown is clear of food particles.
If there is a fault, first try to find a solution
to the problem yourself. If you cannot find
a solution to the problem yourself, speak
your dealer or the local Service Force
Centre.
If you operated the appliance in-
correctly, or the installation was
not carried out by a registered en-
gineer, the visit from the customer
service technician or dealer may
not take place free of charge,
even during the warranty period.
These data are necessary to help you
quickly and correctly. These data are
available on the supplied rating plate.
• Model description .................
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are
available at Service Force Centre and ap-
proved spare parts shops.
7.1 Labels supplied with the
accessories bag
Stick the adhesive labels as indicated be-
low:
MOD.
PROD.NO.
SER.NO
DATA
MOD.
PROD.NO.
SER.NO
DATA
MODELMODEL
MOD.
PROD.NO.
SER.NO.
03 IT
MADE IN ITALY
TYPE
230V-50Hz
IP20
0049
A B C
A)
Stick it on Guarantee Card and send
this part (if applicable)
ENGLISH 17
Commentaires sur ces manuels