
6.3 Removing pan supports
To keep the pan supports in the correct
position, they are put on metal pins
installed in the lateral sides of the hob.
For easier cleaning, pan supports can be
removed from the hob. Lift up the pan
supports keeping them in horizontal
position as shown in the graphic.
Do not lift the pan supports
at an angle, as this will put
strain on the metal pins. This
can cause damage to the
pins and cause them to
break.
The shape of pan supports and the
amount of burners can be different in
other models of the appliance.
6.4 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar.
If not, the dirt can cause damage to
the hob. Take care to avoid burns.
• Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and non-abrasive
detergent. After cleaning, wipe the
hob dry with a soft cloth.
• To clean the enamelled parts, cap
and crown, wash them with warm
soapy water and dry them carefully
before you put them back on.
6.5 Cleaning of the Vertical
Burner
The crowns of brass burners can darken
after long use. To remove the dark
marks, do as follows:
1. Prepare a mixture of 50% water and
50% wine vinegar.
2. Soak the crowns in the mixture for no
longer than 10 minutes. Remove the
marks with a sponge. A high
concentration of moisture or
immersion of the burners in water for
too long can cause damage to their
surfaces.
3. Rinse the crowns in water to remove
the mixture and dry them carefully.
6.6 Cleaning the spark plug
This feature is obtained through a
ceramic ignition candle with a metal
electrode. Keep these components well
clean to prevent difficult lighting and
check that the burner crown holes are
not obstructed.
6.7 Periodic maintenance
Speak to your local Authorised Service
Centre periodically to check the
conditions of the gas supply pipe and the
pressure adjuster, if fitted.
ENGLISH 11
Commentaires sur ces manuels