Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do not clean the appli-
ance with steam blasters or high-pres-
sure cleaners.
Scratches or dark stains on the glass
ceramic have no effect on how the ap-
pliance operates.
Removing the dirt:
1. – Remove immediately: melting plas-
tic, plastic foil, and food containing
sugar. Use a special glass ceramic
scraper. Put the scraper on the glass
ceramic surface at an acute angle and
slide the blade on the surface.
– Stop the appliance and let it cool
down before you clean: limescale
rings, water rings, fat stains, shiny met-
allic discolorations. Use a special
cleaner for glass ceramic or stainless
steel.
2. Clean the appliance with a damp cloth
and some detergent.
3. At the end rub the appliance dry with
a clean cloth.
What to do if...
Problem Possible cause and remedy
You cannot start the appliance or
operate it.
•
The key lock or child safety device operates
. Stop the func-
tion. See the section "Locking/unlocking the control panel" and
“Child safety device”.
•
STOP+GO operates
. Stop the function. See the section
"Stop and go".
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the control
panel
• Start the appliance again and set the heat setting in 10 seconds.
A sound operates when the ap-
pliance is off.
You covered one or more sensor fields. Uncover the sensor fields.
A sound operates 6 times, the
appliance stops.
You covered one or more sensor fields. Uncover the sensor fields.
The residual heat indicator does
not come on.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the after sales
service.
The automatic warm up function
does not start.
•
There is still residual heat on the cooking zone
. Let the
cooking zone cool down
• The highest heat setting is set. The highest heat setting has the
same power as the automatic warm up function.
A sound operates and appliance
starts and stops again. After 5
seconds one more sound oper-
ates.
You covered . Uncover the sensor field.
Sensor fields become hot. The cookware is too big or you put it too near the controls. Put
large cookware on the rear cooking zones if necessary.
The display changes between
two heat settings.
Power Management decreases the power of this cooking zone.
Use cooking zones on the other side.
10 electrolux
(20 pages)
(60 pages)
(36 pages)
(44 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels