Electrolux EHG30800X Manuel d'utilisateur télécharger pdf (Page 10)

Adjusting the minimum level

To adjust the minimum level of the burners, proceed as

follows:

1. Light the burner.

2. Turn the knob on the minimum position.

3. Remove the knob.

4. With a thin screwdriver, adjust the by-pass screw

(see Fig. 7). If changing from town gas to LPG,

completely tighten clockwise the screw, until a small

regular flame is obtained.

5. Finally check the flame does not go out when quickly

turning the knob from the maximum position to the

minimum position.

This procedure can easily be carried out, anyhow the hob

has been positioned or built in the working top.

Burner Ø By-pass

in 1/100

of mm.

Ultra-Rapid 56

Table 1 : BY-pass diameters

Fig. 7

By-pass screw

Table 2 : injectors

BURNER NORMAL REDUCED NORMAL

POWER POWER POWER

kW kW TOWN GAS LPG G30/G31

28-30 mbar

inj. 1/100 m

/h inj. 1/100 g/h - G30 g/h - G31

Ultra-Rapid Town gas 3,7 1,2 312 0,706

LPG : 4 98 291 286

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Electrolux EHG30800X Manuel d'utilisateur Page 10