Electrolux EKC60751X Manuel d'utilisateur télécharger pdf (Page 52)

The oven light

IMPORTANT! Before you change

the bulb, turn all the knobs to zero

and make sure that the cooker is

disconnected from the power supply.

For cookers with a cable, pull out the

plug. For other cookers, disconnect

the power supply by using the

universal pole switch.

Lay a cloth on the bottom of the oven to

protect both the bulb and the protective

glass.

CHANGING

THE

OVEN

LIGHT

CLEANING

THE

PROTECTIVE

GLASS

1 Check that the oven is not hot.

2 Unscrew the protective glass by

turning it to the left and clean it.

(

SEE

ILLUSTRATION

3 If necessary:

Replace the oven light with a new

bulb marked 230–240V, 40W, 300°C,

with an E14 base.

4 Re-fit the protective glass.

REPLACING

THE

LAMP

BULB

PAGE

CLEANING

THE

PROTECTIVE

GLASS

1 Check that the oven is not hot.

2 loosen and remove the oven step

units on the left-hand side (see page

49)

3 Loosen the protective glass (from the

side) by using a narrow, blunt object

(for example a teaspoon) and clean it.

Hold one hand under the glass so that

it does not fall down onto the bottom

of the oven.

3 If necessary:

Replace the oven lighting and fit a

new bulb with an E14 base, marked

230-240V, 25W and 300 C°.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Electrolux EKC60751X Manuel d'utilisateur Page 52

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Electrolux EKC60751X