Electrolux EQTP4520IK GH2 Manuel d'utilisateur télécharger pdf (Page 14)

6. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

6.1 General information

Clean the hob after each use.

Always use cookware with clean bottom.

WARNING!

Sharp objects and abrasive

cleaning agents will damage

the appliance.

6.2 Cleaning function

1. Touch . Each zone is set to 80°C.

The display flashes until the

temperature is 80°C. The function

locks the control panel, but not .

2. When the temperature reaches 80°C

an acoustic signal sounds, and the

control panel becomes unlocked.

3. Put ice cubes one by one on the

roasting zone (you can use also cold

water). At the same time, use a

spatula to remove the remaining

roasting pieces and push all pieces

into the trough.

4. Dry the hob with a clean cloth.

6.3 Cleaning when the hob is

cold

1. Apply a usual cleaning agent to the

roasting surface and let it set for 5

minutes.

2. Remove the cooking residue with a

spatula.

3. Clean the hob with a moist cloth.

4. Dry the hob with a clean cloth.

5. When the hob is dry, rub the roasting

surface with some cooking oil.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy

You cannot activate or op-

erate the hob.

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the con-

nection diagram.

The fuse is released. Make sure that the fuse is

the cause of the malfunc-

tion. If the fuse releases

again and again, contact a

qualified electrician.

Activate the hob again and

set the heat setting in less

than 10 seconds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor field.

www.electrolux.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Commentaires sur ces manuels

Pas de commentaire