Electrolux EQBH60AS Manuel d'utilisateur télécharger pdf (Page 10)

10 natural gas installation electrolux integrated bbq 600/300mm

Preparing the unit for Natural Gas installation

This barbecue is supplied set up for Natural Gas and

is labelled accordingly. A Universal LPG conversion

kit is available from Electrolux Spare Parts if required.

Conversion of this unit to Universal LPG must be carried

out by a qualiﬁed licensed person.

A Certiﬁcate of Compliance must be issued to the owner

on completion of the installation and conversion.

EQBH60AS & EQBL60AS

1. Fitting the Natural Gas installation pipe

• Fit the pipe ensuring the blue sealing washer is in place.

Do not over-tighten.

2. Fitting the regulator

• Fit the regulator ensuring the blue sealing washer

is in place and the arrow indicating gas ﬂow direction

is correct. Do not over-tighten.

3. Fit the hose

• Apply thread tape or sealant to the male thread on the

hose and screw into the regulator. Do not over-tighten.

barbecue gas inlet

sealing washer

sealing washer

regulator – ensure arrow is

pointing in the right direction

1/2” BSP tapered thread hose

– thread tape required

natural gas installation pipe

4. Fit to mains

• Connect the bayonet end to mains.

EQBL30AS

1. Fit ﬂexible black hose to the gas inlet. Do not over-tighten.

2. Fit the brass adaptor to the black ﬂexible hose. Do not

over-tighten.

3. Fit the regulator to the adaptor with ﬁbre washer

ensuring that ﬁbre washer seated correctly into adaptor.

Do not over-tighten.

4. Fit the hose to the regulator

• Apply thread tape or sealant to the male thread on the

hose and screw into the regulator. Do not over-tighten.

gas hose 500mm

brass adaptor

sealing washer

securing bracket

1/2” BSP tapered

thread hose – thread

tape required

regulator – ensure

arrow is pointing in

the right direction

5. Secure regulator using bracket supplied

6. Fit to mains

• Connect the bayonet end to mains.

7. Ensure routing of gas supply hose prevents the hose from

contacting hot surfaces of burner base or burner box.

8. Complete leak test of ﬁnal assemby. (refer to page 12)

Natural Gas installation

INTBBQ600/300_Jun11.indd 10 30/06/11 11:52 AM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Commentaires sur ces manuels

Pas de commentaire