
12 gas bottle safety & leak test electrolux integrated bbq 600/300mm
• This appliance is designed to use a Universal LPG
9kg (20 lbs) gas cylinder.
• The gas cylinder must be made and marked in
accordance with specifications for LPG cylinders.
• It is recommended to turn off the cylinder valve when
the appliance is not in use.
• Gas cylinders must be stored in an approved housing
out of reach of children.
• When disconnecting the gas bottle ensure that all the
control valves are in the ‘OFF’ position.
• Remove the bottle from any housing in which it may be
stored before disconnection.
• When reconnecting the hose to the bottle, ensure that
all connections are tight before replacing in the storage
compartment.
• Carry out a leakage check as detailed on this page after
each re-connection.
• Ensure all gas valves are in the ‘OFF’ position.
• In a small container, mix a solution of water and
detergent or soap.
• After connection of the hose, turn on the valve at the
gas bottle or mains as appropriate.
• Using a brush apply the solution to the gas connection
points and look for bubbles forming.
• Bubbling will indicate a leak.
• Turn off the valve and re-tighten the joint. Repeat the
leak test.
• If the leak persists, turn off the gas at the isolation valve
and contact a licensed gas fitter to correct.
EQBH60AS & EQBL60AS
check for leaks
check hose for signs of
abrasions, cracks or leaks
EQBL30AS
leak test points
Gas bottle safety information Leak test procedure
INTBBQ600/300_Jun11.indd 12 30/06/11 11:52 AM
Commentaires sur ces manuels