Electrolux CONTROLBOX 24/7 Manuel d'utilisateur Page 13

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 204
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 12
13
Flexible control (NB: Only works with Electrolux heat pumps)
Once ControlBox24/7 has been set up for the correct heat pump model, you can control your heat pump by sending
text message to the unit. Follow the instructions below for giving the command. Please note that this command will
start the heat pump even when it is switched off.
The modes which can be selected on the heat pump are: HEAT, COOL and DRY.
To send a setting to the pump WITHOUT specifying a fan speed, enter the following:
<MODE><space><TEMPERATURE> Example: HEAT 20
In the example above, the following setting is sent to the heat pump “
Heat, 20°C, automatic fan speed”
An alternative to send to the heat pump is to state a specific fan speed by adding a colon after the temperature, and
then entering the desired fan speed. See the following:
<MODE><space><TEMPERATURE>:<FAN SPEED> Example: COOL 18:2
In the example above, the following setting is sent to the heat pump “
Cool, 20°C, fan speed 2
”.
REMOTE CONTROL YOUR HEAT PUMP
EHEAT ECOOL CHEAT CCOOL HXHEAT
COOL
16-30 16-30 18-32
DRY
16-30 * 16-30 * 16-30 * 16-30 *
HEAT
8, 16-30 8, 16-30 8, 16-30 8, 16-30
Fan speed
0 (auto), 1-5. 0 (auto), 1-5 0 (auto), 1-3. 0 (auto), 1-3. 0 (auto), 1-3.
A list of the available
settings for the various
models is shown on
the right.
*DRY = non-adjustable
fan speed.
TIP! By sending the
OFF command, you can
also switch off the heat
pump.
Vue de la page 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 203 204

Commentaires sur ces manuels

Pas de commentaire