Electrolux CONTROLBOX 24/7 Manuel d'utilisateur Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 204
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
9
PROGRAMMING
To see what the current temperature is where your ControlBox24/7 is located, send the following text message to the unit:
TEMP
Request current temperature
LTWARN <NUMBER> Example: LTWARN 12
The example above will cause the unit to send a warning
report when the temperature falls below 12°C, as
“Temperature - LOW”.
If the temperature then increases again and reaches
the set value, another message will be sent saying:
“Temperature - RESTORED”
HTWARN <NUMBER> Example: HTWARN 27
The example above will cause the unit to send a
warning report when the temperature exceeds 27°C as
“Temperature - HIGH”.
If the temperature then decreases again and reaches
the set value, another message will be sent saying:
“Temperature - RESTORED”
The unit’s temperature warning function can be easily
activated or deactivated using the following command:
Activation: LTWON (default setting)
Deactivation: LTWOFF
The unit’s temperate warning function can be easily
activated or deactivated using the following command:
Activation: HTWON
Deactivation: HTWOFF (default setting)
Temperature warning
LOW TEMPERATURE ALARM HIGH TEMPERATURE ALARM
The unit will automatically report if the temperature will exceed the set value. The default setting for low temperature alarm is
+5°C and for high temperature 30°. These values can be changed to between 0°C and +50°C. To change a set value, send the
following text message to the unit:
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 203 204

Commentaires sur ces manuels

Pas de commentaire