Electrolux EBSL6CN Manuel d'utilisateur télécharger pdf (Page 13)

Residual heat

When you deactivate the appliance, the

display shows the residual heat. You can

use the heat to keep the food warm.

6.6 Energy saving

The appliance contains fea-

tures which help you save en-

ergy during everyday cooking:

•

Residual heat:

– When the heating function or pro-

gramme operates, the heating ele-

ments are deactivated 10% earlier

(the lamp and fan continue to oper-

ate). For this feature to operate, the

cooking time must be longer than 30

minutes or you must use the clock

functions ( Duration , End Time ).

– When the appliance is off, you can

use the heat to keep food warm. The

display shows the remaining temper-

ature.

• Cooking with the lamp off - Touch

and hold

for 3 seconds to deactivate

the lamp during cooking.

7. CLOCK FUNCTIONS

Symbol Function Description

Minute Minder

To set a countdown (max 2 hours 30 minutes). This

function has no effect on the operation of the appli-

ance. You can also activate it when the appliance is

off. Use

to activate the function. Press or

to set the minutes and OK to start.

Duration

To set how long the appliance has to be in opera-

tion (max. 23 h 59 min).

End Time

To set the switch-off time for a heating function

(max. 23 h 59 min).

If you set the time for a clock function, the

time starts to count down after 5 sec-

onds.

If you use the clock functions Du-

ration and End Time , the appli-

ance deactivates the heating ele-

ments after 90 % of the set time.

The appliance uses the residual

heat to continue the cooking

process until the time ends (3 - 20

minutes).

Setting the clock functions

1.

Set a heating function.

2.

Press again and again until the

display shows the necessary clock

function and the related symbol.

3.

Press or to set the necessary

time. Press OK to confirm.

When the time ends, an acoustic sig-

nal sounds. The appliance deacti-

vates. The display shows a message.

4.

Press a sensor field to stop the signal.

• With Duration and End Time you must

set the heating function and the tem-

perature first. Then you can set the

clock function. The appliance deacti-

vates automatically.

• You can use Duration and End Time at

the same time, if you want to automati-

cally activate and deactivate the appli-

ance on a given time later.

• When you use the Core Temperature

Sensor (if applicable), the Duration and

End Time functions do not work.

7.1 Heat + Hold

The Heat + Hold function keeps prepared

food warm at 80 °C for 30 minutes. It ac-

tivates after the baking or roasting proce-

dure ends.

• You can activate or deactivate the func-

tion in the Basic Settings menu.

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Commentaires sur ces manuels

Pas de commentaire