
Problem Possible cause Remedy
The oven does not heat
up.
The fuse is released. Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse releases
again and again, contact a
qualified electrician.
The lamp does not oper‐
ate.
The lamp is defective. Replace the lamp.
Steam and condensation
settle on the food and in
the cavity of the oven.
You left the dish in the
oven for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
9.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the
appliance cavity. Do not remove the
rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
10. INSTALLATION
WARNING!
Refer to Safety chapters.
10.1 Building Under
CAUTION!
Only a qualified and
competent person must do
the installation of the
appliance. If you do not
contact a qualified or
competent person, the
guarantee becomes invalid if
there is damage.
Before you install the appliance, fit it with
the applicable hob from the table.
Type Maximum power
EHA6040 6500 W
EHA6046 7600 W
EHA6041 6400 W
EHS6040 7000 W
10.2 Electrical connection with
the hob
The hob connection socket is at the top
of the oven cabinet. The hob has
connection leads for the cooking zones
and the ground cable. The leads have
plug-in connectors. To connect the hob
to the oven, plug the connectors into the
ENGLISH 21
Commentaires sur ces manuels