Electrolux EQW4111BOZ Manuel d'utilisateur télécharger pdf (Page 10)

prevent difficult lighting and check that the

burner crown holes are not obstructed.

6.5 Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the conditions

of the gas supply pipe and the pressure

adjuster, if fitted.

6.6 Glass bar

• Do not use the scraper or sharp

objects to clean the glass bar and the

space between it and glass ceramic.

Glass bar is attached to the ceramic

plate.

• Do not put the pots on the glass bar.

• Make sure that the pans and pots do

not touch the glass bar.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy

There is no spark when you

try to activate the spark

generator.

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply.

The fuse is released. Make sure that the fuse is

the cause of the malfunc-

tion. If the fuse releases

again and again, contact a

qualified electrician.

The flame extinguishes im-

mediately after ignition.

Thermocouple is not heated

up sufficiently.

After lightning the flame,

keep the knob pushed for

equal or less than 10 sec-

onds.

7.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Make sure, you

operated the hob correctly. If not the

servicing by a service technician or dealer

will not be free of charge, also during the

warranty period. The instructions about

the Service Centre and conditions of

guarantee are in the guarantee booklet.

www.electrolux.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Commentaires sur ces manuels

Pas de commentaire