Electrolux EQW4111BOZ Manuel d'utilisateur télécharger pdf (Page 15)

into the worktop cutout. Push it half of

its width under the hob.

7. Loosely screw in the fixing plates from

below to the worktop and to the

connection bar.

8. Insert next hob into the worktop

cutout. Make sure that the front edges

of the hobs are on the same level.

9. Tighten the fixing plates / retaining grip

screws.

10. Use silicone to seal the gaps between

the hobs and between the hobs and

the worktop.

11. Put some soapy water on the silicone.

12. Press the rubber shape with some

strength against the glass ceramic and

move it slowly along the space.

13. Do not touch the silicone until it

becomes hard, it can last about a day.

14. Carefully remove the silicone that

came out with a shaving blade.

15. Clean the glass surface.

8.9 Possibilities for insertion

The panel installed below the hob must be

easy to remove and let an easy access in

case a technical assistance intervention is

necessary.

Kitchen unit with door

min 20 mm

(max 150 mm)

30 mm

60 mm

A) Removable panel

B) Space for connections

Kitchen unit with oven

The electrical connection of the hob and

the oven must be installed separately for

safety reasons and to let easy remove

oven from the unit.

9. TECHNICAL INFORMATION

9.1 Hob dimensions

Width 360 mm

Depth 520 mm

ENGLISH

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Electrolux EQW4111BOZ Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Electrolux EQW4111BOZ