Electrolux EOG21300X Manuel d'utilisateur télécharger pdf (Page 30)

30 electrolux

Minimum level adjustment of

gas oven burner

This procedure must be

undertaken by a competent and

qualified engineer only.

1. Disconnect the appliance from the

mains supply.

2. Remove the gas oven control knob.

3. Adjust the by-pass screw (“A”) using

a thin bladed screwdriver. When

changing from natural gas to liquid

gas, completely tighten the adjustment

screw in.

When changing from liquid gas to

natural gas, undo the by-pass screw

about 3/4 of a turn.

4. Refit the gas oven control knob.

5. Restore the mains supply.

Do not restore the mains

supply if all the removed parts

have not been fitted back in

their original position.

6. Light the oven gas burner (see the

relevant chapter), set the gas oven

control knob on 240 and let the oven

heat for 10 minutes at least.

7. Check that the oven gas burner flame

does not fail when quickly turning the

GAS

INJECTOR NOMINAL NOMINALGAS REDUCED BY-PASS NOMINAL

TYPE MARK GAS FLOW GAS NEEDLE GAS

1/100 mm POWER POWER (1/100 mm) PRESSURE

(kW) m

/h g/h (kW) (mbar)

114 2,7 0,257 - 1,0 Reg. 20

078 2,5 - 182 1,0 52 30

Natural Gas

(G20)

Liquid Gas

(G30/G31)

Gas Oven Burner Data

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

Pas de commentaire

Electrolux EOG21300X Manuel d'utilisateur Page 30