Electrolux EWF12853 Manuel d'utilisateur télécharger pdf (Page 23)

6. Remove fluff and objects from the

pump (if there are any).

7. Make sure that the impeller of the

pump can turn. If this does not occur,

contact the service centre.

8. Clean the filter under the water tap.

9. Put the filter back in the pump into

the special guides. Make sure that

you correctly tighten the filter to

prevent leakages.

10. Put the flap back and close the

drain pump door.

Remove the water inlet hose from

the water tap.

Clean the filter in the inlet hose with

a stiff brush.

5. Pull back the drainage duct and turn

the filter counter-clockwise to

remove it.

If your water is very hard or contains

traces of lime deposit, the water inlet

filter may become clogged. It is therefore

a good idea to clean it from time to time.

Cleaning The Water Inlet

Filter

8.8

To clean the water inlet filters:

Close the water tap.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Glenn vessey 03 May 2024 | 03:35:05

How to clear pump drain

Electrolux EWF12853 Manuel d'utilisateur Page 23