Electrolux EBKSL7CN Manuel d'utilisateur télécharger pdf (Page 13)

5.

If necessary, set the function Duration

or End Time .

The first steam shows after approxi-

mately 2 minutes. An acoustic signal

sounds when the appliance is at ap-

proximately the set temperature.

The signal sounds again at the end of

the cooking time.

6.

Deactivate the appliance.

When the steam generator is

empty, an acoustic signal sounds.

When the appliance cools down,

soak up all remaining water from

the steam generator with the

sponge. If necessary, clean the

steam generator with some vine-

gar.

Let the appliance dry fully with the

door open.

6.6 Heat-up indicator

When you activate a heating function, the

bar on the display comes on. The bar

shows that the temperature increases.

Fast Heat Up Indicator

This function decreases the heat-up time.

To activate the function, hold

for 3 sec-

onds. You will see the heat-up indicator

alternates.

Residual heat

When you deactivate the appliance, the

display shows the residual heat. You can

use the heat to keep the food warm.

6.7 Energy saving

The appliance contains fea-

tures which help you save en-

ergy during everyday cooking:

•

Residual heat:

– When the heating function or pro-

gramme operates, the heating ele-

ments are deactivated 10% earlier

(the lamp and fan continue to oper-

ate). For this feature to operate, the

cooking time must be longer than 30

minutes or you must use the clock

functions ( Duration , End Time ).

– When the appliance is off, you can

use the heat to keep food warm. The

display shows the remaining temper-

ature.

• Cooking with the lamp off - Touch

and hold

for 3 seconds to deactivate

the lamp during cooking.

7. CLOCK FUNCTIONS

Symbol Function Description

Minute Minder

To set a countdown (max 2 hours 30 minutes). This

function has no effect on the operation of the appli-

ance. You can also activate it when the appliance is

off. Use

to activate the function. Press or

to set the minutes and OK to start.

Duration

To set how long the appliance has to be in opera-

tion (max. 23 h 59 min).

End Time

To set the switch-off time for a heating function

(max. 23 h 59 min).

If you set the time for a clock function, the

time starts to count down after 5 sec-

onds.

If you use the clock functions Du-

ration and End Time , the appli-

ance deactivates the heating ele-

ments after 90 % of the set time.

The appliance uses the residual

heat to continue the cooking

process until the time ends (3 - 20

minutes).

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Commentaires sur ces manuels

Pas de commentaire