Electrolux EHL8740FOG Manuel d'utilisateur télécharger pdf (Page 13)

6. CARE AND CLEANING

Clean the appliance after each use.

Always use cookware with clean bottom.

Scratches or dark stains on the

glass-ceramic cause no effect on

how the appliance operates.

To remove the dirt:

•–Remove immediately: melted plas-

tic, plastic foil, and food with sugar. If

not, the dirt can cause damage to

the appliance.

–

Remove after the appliance is

sufficiently cool: limescale rings ,

water rings, fat stains, shiny metallic

discolorations. Use a special cleaning

agent for glass ceramic.

• The surface of the hob has horizontal

grooves. Clean the appliance with a

moist cloth and some detergent with a

smooth movement from left to right.

• At the end rub the appliance dry with

a clean cloth.

7. TROUBLESHOOTING

Problem Possible cause Remedy

You cannot activate the

appliance or operate it.

Activate the appliance

again and set the heat

setting in less than 10

seconds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor

field.

The STOP+GO function

operates.

Refer to the chapter “Dai-

ly Use”.

There is water or fat

stains on the control pan-

el.

Clean the control panel.

An acoustic signal

sounds and the appliance

deactivates.

An acoustic signal

sounds when the appli-

ance is deactivated.

You put something on

one or more sensor fields.

Remove the object from

the sensor fields.

The appliance deacti-

vates.

You put something on the

sensor field

.

Remove the object from

the sensor field.

The residual heat indica-

tor does not come on.

The cooking zone is not

hot because it operated

only for a short time.

If the cooking zone oper-

ated sufficiently long to

be hot, speak to the serv-

ice centre.

The Automatic Heat Up

function does not oper-

ate.

The cooking zone is hot. Let the cooking zone be-

come sufficiently cool.

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire