Electrolux EKK60331 Manuel d'utilisateur télécharger pdf (Page 25)

electrolux 25

Gas connection must be carried out

according to the rules in force. The manufac-

turing company release the unit, once tested,

adjusted for the kind of gas stated on the

rating plate located on the back of the range,

next to connection pipe. Be sure that you are

going to connect the unit to the same kind

of gas written on the plate.

Gas connection (Fig. 14)

LPG : use the pipe holder «A».

Natural gas : use the pipe holder «B».

Always insert the gasket «C». Then

proceed with the gas connection, as indi-

cated in the relevant paragraphs.

Connection

using a rigid pipe or a flexible

metal pipe

To ensure higher safety, it is recom-

mended to carry out the connection to the

gas system using rigid pipes (ex. copper) or

using flexible stainless steel pipes, to avoid

any stress to the unit. Gas feeding pipe fitting

is Gc 1/2. For this type of installation,

connection to the gas supply should be

carried out using only and exclusively flexible

metallic tubes in conformity with rules in

force.

Connection

using flexible non metal

pipes

When the connection can be easily

inspected in its full extent, there is the chance

to use a flexible pipe according to the rules

in force. The flexible pipe must be tightly fixed

using clamps according to the rules in force.

Gas connection

Fig. 14

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

Pas de commentaire

Electrolux EKK60331 Manuel d'utilisateur Page 25