Electrolux EKK60331 Manuel d'utilisateur télécharger pdf (Page 27)

electrolux 27

To adapt the appliance to a different kind

of gas from the one the appliance has been

set for, follow the instructions below in their

order.

Hob burners nozzles

1. Nozzles replacement

1. Remove the pan supports.

2. Extract the caps and the wall baffles of

the burners.

3. Using a socket spanner 7 unscrew and

remove (Fig. 16) the nozzles replacing

them with the ones required for the kind

of gas in use (see table “Burner

characteristics”).

4. Reassemble the parts following the same

procedure backwards.

These burners do not need any primary

air regulation.

2. Adjustment of minimum level

To adjust the minimum level:

1. turn the knob to the position of mini-

mum flame.

2. Remove the knob (Fig. 17).

3a. When converting from natural gas to

liquid gas, tightly screw the by-pass

screw of the cocks.

3b.When converting from liquid gas to natu-

ral gas unscrew about one-fourth turn

by-pass screw, until a regular small

flame is reached.

4. Reassemble the parts following the

same procedure backwards.

Check that, turning quickly the knob from

the maximum position to the minimum one,

the flame does not go out.

Fig. 16

Adaptation to different kinds of gas

By-pass screw

Fig. 17

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

Pas de commentaire

Electrolux EKK60331 Manuel d'utilisateur Page 27