
TROUBLESHOOTING
Problem Possible cause Remedy
There is no spark when
lighting the gas.
• There is no electrical
supply.
• Make sure that the ap-
pliance is connected
and the electrical supply
is switched on.
• Do a check of the fuse.
If the fuse is released
more than one time, re-
fer to a qualified electri-
cian.
There is no spark when
lighting the gas.
• The burner cap and
crown are placed un-
evenly.
• Make sure that the
burner cap and crown
are in the correct posi-
tions.
The flame is blown out im-
mediately after ignition.
• The thermocouple is not
heated sufficiently.
• After lightning the flame,
keep the knob pushed
for approximately 5 sec-
onds.
The gas ring burns un-
evenly.
• The burner crown is
blocked with food resi-
due.
• Make sure that the in-
jector is not blocked
and the burner crown is
clear of food particles.
The appliance does not
operate.
• There is no electrical
supply.
• Make sure that the ap-
pliance is connected
and the electrical supply
is switched on.
• Do a check of the fuse.
If the fuse is released
more than one time, re-
fer to a qualified electri-
cian.
The electrical cooking
zone does not heat up.
• There is no electrical
supply.
• The wrong knob is used
to operate the cooking
zone.
• Make sure that the ap-
pliance is connected
and the electrical supply
is switched on.
• Make sure that you turn
the correct control
knob.
• Do a check of the fuse.
If the fuse is released
more than one time, re-
fer to a qualified electri-
cian.
ENGLISH 41
Commentaires sur ces manuels