
move residues by sliding the blade over
the surface. Wipe the appliance with a
damp cloth and a little washing up liquid.
Finally, rub the appliance dry using a
clean cloth .
2. Limescale rings, water rings, fat
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for glass
ceramic or stainless steel.
What to do if...
Problem Possible cause Remedy
The cooking zones will not
switch on or are not functioning
More than 10 seconds have
passed since the appliance was
switched on
Switch the appliance on again.
The child safety device is switch-
ed on
Deactivate child safety device
(See the section “Child safety
device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
Automatic switch off has been
triggered
Remove any objects (pan,
cloths, etc.) that are lying on the
control panel. Switch the appli-
ance on again
There is water on the control
panel, or the control panel is
covered with splashes
Wipe the control panel
is active Switch off
Acoustic signal sounds when
appliance is switched off
The control panel is wholly or
partly covered by objects.
Remove objects.
There is water or fat splashes on
the control panel
Wipe the control panel
The residual heat indicator is not
displaying anything
The cooking zone was only on
for a short time and is therefore
not hot
If the cooking zone is supposed
to be hot, call the Customer
Service Department.
Acoustic signal sounds and ap-
pliance switches itself on and
then off again; after 5 seconds
another acoustic signal sounds
The On/Off sensor field has
been covered up, e.g. by a cloth
Do not place any objects on the
control panel
is lit
Automatic switch-off has been
triggered
Switch off the cooking zone.
Switch the cooking zone on
again
and number are displayed
Electronics fault Disconnect the appliance from
the electrical supply for a few mi-
nutes (Take the fuse out of the
house’s wiring system) If after
switching on again,
is dis-
played again, call the customer
service department
If you are unable to remedy the problem
by following the above suggestions,
please contact your dealer or the Cus-
tomer Care Department.
Warning! Repairs to the appliance are
only to be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.
electrolux 11
Commentaires sur ces manuels