Electrolux WTSL6E200 Manuel d'utilisateur télécharger pdf (Page 20)

8.12 Schleudern - Essorage

Touch button Schleudern - Essorage to:

• Decrease the maximum speed of the

spin phase of the programme.

The display shows only

the spin speeds available

for the set programme.

• Deactivate the spin phase ( 'No spin'

function).

• Activate the Rinse Hold function.

Set this function to prevent fabric

creases. The appliance does not drain

the water when the programme is

completed.

8.13 Temp.

Touch this button to change the default

temperature.

Symbols

and = cold water

9. BEFORE FIRST USE

1. Put a small quantity of detergent in the

compartment for washing phase.

2. Set and start a programme for cotton

at the highest temperature without

laundry.

This removes all possible dirt from the

drum and the tub.

9.1 Clock setting

After you set the language, the display

tells to set the clock. The hour digits flash.

1. Turn the programme knob to change

the hour.

2. Touch Start/Pause - Départ/Pause

button to confirm the selection.

The minute digits flash.

3. Turn the programme knob to change

the minutes.

4. Touch Start/Pause - Départ/Pause

button to confirm the selection.

9.2 Change the time of the day

after the first activation

1. Touch the button Spülen + - Rinçage

+ and the button Zeit Sparen - Court

at the same time for some seconds.

The hour digits flash.

2. Turn the programme knob to change

the hour.

3. Touch Start/Pause - Départ/Pause

button to confirm the selection.

The minute digits flash.

4. Turn the programme knob to change

the minutes.

5. Touch Start/Pause - Départ/Pause

button to confirm the selection.

9.3 Language setting

The first time you activate the appliance,

the display shows the default language

and tells you to confirm it or change it:

1. Turn the programme knob to set the

desired language.

2. When the display shows the

necessary language touch Start/Pause

- Départ/Pause button to confirm the

selection.

9.4 Change the language after

the first activation

1. Touch button Schleudern - Essorage

and button Optionen/Options at the

same time for some seconds.

2. When the display shows the language

set, turn the programme knob to set

the new language.

3. Touch Start/Pause - Départ/Pause

button to confirm the selection.

10. DAILY USE - WASHING ONLY

10.1 Before activating the

appliance

1. Open the water tap.

2. Connect the mains plug to the mains

socket.

10.2 Activating the appliance

and setting a programme

1. Press button On Off to activate the

appliance.

www.electrolux.com20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Commentaires sur ces manuels

Pas de commentaire