
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too low
spin speed for the items to be
washed and dried.
2. Touch button Start/Pause - Départ/
Pause to start the programme.
The display shows the door locked
indicator and the programme in progress
indicator and, alternatively, the drying
time and the time of the cycle end.
The text bar tells that the appliance is
operating.
The display shows regularly a new time
value.
12.3 Washing and Timed Drying
1. Touch button Zeit Trocknen -
Séchage par minuterie repeatedly to
set the time value (see the «Drying
Programme» table).
The display shows 15 minutes for cottons
and synthetics programmes while starts
from 13 minutes for wool programme.
Each time you press this button the time
value increases by 5 minutes. The display
shows the set time value.
2. Press Start/Pause - Départ/Pause to
start the programme.
On the display appear the door locked
and the programme in progress
indicators.
The display shows, alternatively, the
programme duration and the time of the
cycle end.
The text bar tells that the appliance is
operating.
12.4 At the end of the
programme
The appliance stops automatically. The
acoustic signals operate (if they are
active).
For more information see ‘At the end of
the drying programme “ of the previous
chapter.
After drying phase, clean the
air filters, the drum, the seal
and the inside of the door
with a wet cloth.
12.5 Fluff in the fabrics
During the washing and/or drying phase,
some types of fabric, (sponge, wool,
sweatshirt) could release fluff.
The released fluff could stick to the fabrics
during the next cycle.
This inconvenient increases with technical
fabrics.
To prevent the fluff in your laundry, we
recommend that you:
• To do not wash dark fabrics after you
washed and dried light coloured fabrics
(new sponge, hand towel, wool,
sweatshirt ) and the contrary.
• To dry this type of fabrics at open air
when they are washed the first time.
• To clean the drain filter.
• After the drying phase, clean the air
filters, the empty drum, the gasket and
the door with a wet cloth.
To remove the fluff inside the drum,
set a special programme:
• Empty the drum.
• Clean the drum, the gasket and the
door with a wet cloth.
• Set the rinse programme.
• Touch at the same time Schleudern -
Essorage and Spülen + - Rinçage + to
activate the cleaning function until the
display shows CLE.
• Touch Start/Pause - Départ/Pause to
start the programme.
If the appliance is frequently
used, carry out the CLE
programme regularly.
www.electrolux.com26
Commentaires sur ces manuels