Electrolux WTSL6E200 Manuel d'utilisateur télécharger pdf (Page 35)

Message Possible solution

Make sure that the pressure of the water supply is not

too low. For this information, contact your local water

authority.

Make sure that the water tap is not clogged or is furred

with lime-scale.

Make sure that the filter of the inlet hose and the filter of

the valve are not clogged. Refer to “Care and cleaning”.

Make sure that the inlet hose is not damaged.

Make sure that the connection of the water inlet hose is

correct.

The display tells to check

the drain filter: the appli-

ance does not drain the

water.

Make sure that the drain hose is not damaged.

Make sure that the drain filter is not clogged. Clean the

filter, if necessary. Refer to 'Care and cleaning'.

Make sure that the connection of the drain hose is cor-

rect.

The display tells to check

the door.

Make sure that the appliance door is not open or closed

correctly.

The display tells there is a

water alert.

The anti-flood device is activated:

• Disconnect the appliance.

• Close the water tap.

• Contact the service centre.

The display tells that the

main supply is unstable.

Wait until the mains supply is stable. The appliance au-

tomatically starts operating.

At the end of the washing

cycle the display tells that

too much detergent was

used.

This is not a failure but a suggestion for next wash to

decrease the detergent quantity.

The display tells to check

the air filter (the indicator

flashes and the acous-

tic signal operates)

Make sure that the filter drawer is correctly inserted.

Problems without alarm messages

Problem Possible solution

The programme does not

start.

Make sure that the mains plug is connected to the

mains socket.

ENGLISH

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Electrolux WTSL6E200 Manuel d'utilisateur Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver Electrolux WTSL6E200