Electrolux WTSL6E200 Manuel d'utilisateur télécharger pdf (Page 23)

When the countdown is completed, the

programme starts automatically.

Before you touch button

Start/Pause - Départ/Pause

to start the appliance, you

can cancel or change the set

of the delay start.

10.9 Cancelling the delay start

1. Touch button Start/Pause - Départ/

Pause. The related indicator flashes.

2. Touch button Zeitvorwahl - Départ

Différé again and again until the

display tells that there is no delay start.

3. Touch button Start/Pause - Départ/

Pause. The programme starts.

10.10 Interrupting a programme

and changing the options

You can change only some options before

they operate:

1. Touch button Start/Pause - Départ/

Pause.

The related indicator flashes.

2. Change the options.

3. Touch button Start/Pause - Départ/

Pause again.

The washing programme continues.

10.11 Cancelling a running

programme

1. Press button On Off to cancel the

programme and to deactivate the

appliance.

2. Press button On Off again to activate

the appliance.

Now, you can set a new washing

programme.

Before starting the new

programme, the appliance

could drain the water. In this

case, make sure that the

detergent is still in the

detergent compartment; if

not, fill the detergent again.

10.12 Opening the door

WARNING!

If the temperature and level of

the water in the drum are too

high and the drum still rotates

you cannot open the door.

While a programme or the delay start

operates, the appliance door is locked.

To open the appliance door:

1. Touch button Start/Pause - Départ/

Pause.

The door lock symbol in the display goes

off.

2. Open the appliance door.

3. Close the appliance door and touch

button Start/Pause - Départ/Pause.

The programme or the delay start

continues

10.13 Draining water out after

end of cycle

The washing programme is

completed, but there is water in the

drum:

• The drum turns regularly to prevent the

creases in the laundry.

• The door stays locked.

• You must drain the water to open the

door:

1. If necessary, decrease the spin speed.

2. Touch the Start/Pause - Départ/Pause

button.

The appliance drains the water and spins.

3. When the programme is completed

and the door lock indicator goes off,

you can open the door.

4. Press On Off some seconds to

deactivate the appliance.

The appliance drains and

spins automatically after

approximately18 hours.

10.14 AUTO Stand-by option

The AUTO Stand-by function automatically

deactivates the appliance to decrease the

energy consumption when:

• You do not use the appliance for 5

minutes before you press Start/Pause -

Départ/Pause button.

ENGLISH

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Commentaires sur ces manuels

Pas de commentaire