Electrolux EOV5821AAX Manuel d'utilisateur télécharger pdf (Page 15)

the meat is at the set temperature, the

appliance deactivates.

There are two temperatures to be set:

• The oven temperature.

• The core temperature.

Only use the core temperature

sensor supplied with the appli-

ance or genuine replacement

parts.

1.

Put the tip of the core temperature

sensor into the centre of the meat.

2.

Activate the appliance.

3.

Put the core temperature sensor plug

into the socket on the front of the ap-

pliance.

The display shows the core tempera-

ture sensor symbol.

4.

Press or in less than 5 sec-

onds to set the core temperature.

5.

Set the oven function and, if necessa-

ry, the oven temperature.

The appliance calculates an approxi-

mate end time. The end time is differ-

ent for different quantities of food, the

set oven temperature (minimum 120

°C) and the operating mode. The ap-

pliance calculates the end time in ap-

proximately 30 minutes.

6.

Make sure that the core temperature

sensor stays in the meat and in the

core temperature sensor socket dur-

ing the cooking.

7.

If necessary, you can set a new core

temperature during the cooking. To

do this, touch

.

8.

When the meat is at the set core tem-

perature, an acoustic signal sounds.

The appliance deactivates automati-

cally.

Touch a sensor field to stop the sig-

nal.

9.

Remove the core temperature sensor

plug from the socket . Remove the

meat from the appliance.

WARNING!

The core temperature sensor is

hot. There is a risk of burns. Be

careful when you remove the tip

and plug of the core temperature

sensor.

9.2 Telescopic runners

°C

1.

Pull out the right and left hand tele-

scopic runners.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 67 68

Commentaires sur ces manuels

Pas de commentaire